Difference between revisions of "Platen"
| Line 1: | Line 1: | ||
| − | The '''platen''' is a cylindrical roller, usually made of rubber or cork, that serves as the printing surface of most machines. | + | The '''platen''' is a cylindrical roller, usually made of rubber or cork, that serves as the printing surface of most machines. |
__TOC__ | __TOC__ | ||
| + | ==History== | ||
| + | The platen began with the [[Sholes and Glidden]] typewriter as a faceted cylinder to provide a printing surface for the typewriter. Consecutive designs kept this element, but made it cylindrical to facilitate the feeding of paper with round feed rollers. | ||
==Maintenance== | ==Maintenance== | ||
Revision as of 01:44, 16 May 2024
The platen is a cylindrical roller, usually made of rubber or cork, that serves as the printing surface of most machines.
Contents
History
The platen began with the Sholes and Glidden typewriter as a faceted cylinder to provide a printing surface for the typewriter. Consecutive designs kept this element, but made it cylindrical to facilitate the feeding of paper with round feed rollers.
Maintenance
Many typewriters, particularly those manufactured before the 1950s, will suffer from hard platens. For these, the only long-term solution is to replace the platen rubber with new rubber. Properly recovered platens will have a hardness around Shore A 86. When working on a typewriter, it is recommended to clean the platen with a rag and rubbing alcohol. That will help it have more grip to the paper. If you're using a machine with a hard platen, inserting backing sheets is strongly recommended. They keep the firm rubber from sustaining damage or chipping as a result of the type slugs hitting it.
Temporary solutions exist in the form of rubber softeners, but these tend to be short-lived and damage the platen over time.
JJ Short and Associates of New York recovers platens.
