Difference between revisions of "Common Questions"
| Line 11: | Line 11: | ||
Could be gunked up or need to be re-formed. Definitely rule out all other potential causes before bending the metal. | Could be gunked up or need to be re-formed. Definitely rule out all other potential causes before bending the metal. | ||
| + | === My draw band disconnected === | ||
| + | |||
| + | https://www.youtube.com/watch?v=b-R_85kmKMM | ||
===Help! There's white powder on my keys!=== | ===Help! There's white powder on my keys!=== | ||
Revision as of 02:52, 19 September 2020
Others have felt your pain.
Contents
Removing hair and dust and other gunk (some crusted in)
A detailing brush with a small handheld vacuum that's used for computers can be effective at removing hair and other debris. Other tools one might use are a dental pick, a paint brush, and pipe/straw cleaners (single use or reusable, hard and soft). Using tools can be more effective than canned air at times.
An air compressor can send piece of your typewriter flying if they're not secure, so some prefer a low powered vacuum with a dust cup with filter. There are ones for cleaning electronics/keyboards that can serve this purpose. Others used canned air or low pressure compressors.
My ribbon vibrator (piece that holds ribbon) is stuck
Could be gunked up or need to be re-formed. Definitely rule out all other potential causes before bending the metal.
My draw band disconnected
https://www.youtube.com/watch?v=b-R_85kmKMM
Help! There's white powder on my keys!
No, typewriters do not automatically generate cocaine.
White powder on 1950s and later plastic keys is a result of a chemical process known as degassing and a result of decomposition in the plastic itself. It can be removed with vigorous dry rubbing, with bare fingers or gently with a Scotch Brite pad. Some say that WD-40 on your fingers may help. Do a couple now, do something else, do a couple more. You might get blisters. Have fun!
